Prijzen incl. btw excl. verzendingskosten
Klaar voor onmiddellijke verzending, leveringstijd circa 1-3 werkdagen
- Productnr.: BNL-10104
- Verzenden naar:
-
- Verzending op de dag van bestelling
- 30 dagen geld-terug garantie
- 3 jaar BluGuitar garantie
The BluGuitar® MIDI1 is a MIDI adapter for controlling the BluGuitar® AMP1™ by an external MIDI controller.
If you want to set up an individual MIDI system with a MIDI controller of your choice, you can control the AMP1 with the BluGuitar MIDI1 adapter interface. This turns the FOOTSWITCH jack on the AMP1 into a MIDI IN socket.
All of the AMP1's switching functions (clean/overdrive, boost, reverb and the selector switch for the three overdrive channels) can be accessed using MIDI Program Change messages. Also the MasterVolume, Gain/Clean Volume, PowerSoak and FX-Loop on/off can be controlled via MIDI.
The interface electronics are powered by the AMP1. Therefore no additional power supply or cable is required.
Any possible switching operation of the AMP1 can be recalled by a MIDI program change command. This allows up to 128 presets to be created. The assignment is done using the "MIDI Learn" function on the AMP1.
Power supply: | MIDI1 Adapterinterface powered by AMP1 |
Receive channel: | 1 |
MIDI Program Change: | 128 programm change messages |
MIDI Programm Change numbers: | 000 - 127 |
Switching Program Change: | Clean, Vintage, Classic, Modern, Boost on/off, Reverb on/off, FX-Loop on/off, 2nd Master Volume on/off, Power Soak on/off |
MIDI Control Change: | 2nd Master (CC 007), Gain/Clean Volume (CC 020), PowerSoak (CC 030) |